Hello all,

I wanted to take this opportunity to notify everyone in the group about an exciting new fuel additive that I discovered from a podcast by Sterling Allan.  DISCLAIMER, I am set up as a distributor for the product described, and may ultimately have a financial interest in it.  At this point, I have not personally tested the product in my car, although I intend to.  I am getting involved now because I believe it could be a great opportunity, and at this point, it’s free to get involved.

The product is supposed to save 10% or more on fuel mileage for about 60% of the people who use it.  Some few people get very little improvement and some get quite a bit.  The reason for the variance is that engines and cars vary widely, and driver habits vary widely.  I thought you might want to consider signing up for free as a distributor.  However, I think, after they have their grand opening around June 20, it may not be free any more.  I signed up just to make sure I didn’t miss it.  There is no obligation to participate and you don’t have to reveal any financial data at first.  They do ask for your SSN but you can sign up without it.  Just enter the data requested and indicated by the asterisks.  If you become active as a distributor, I’m sure more data would be required, since they have to be able to pay you, and they have to be able to report to the IRS.

In terms of the additive itself, it uses nanometer scale water droplets in an emulsion in the additive.  According to the audio I heard, the water droplets explode in the combustion chamber and enhance the combustion process.  There’s not so much as to reduce the flame.  Also, the hydrogen may disassociate from the oxygen and help the combustion.  They say it also reduces emissions.  They say they’ve been selling in other countries for many years, and have a billion miles of testing logged (for customers, etc.).  If you decide to sign up, please use the link below with my name in it:

http://www.fuellegacy.com/rfrazier

I don’t know yet how fully I’ll be participating in this.  However, I’ll almost certainly be using the product myself, after further confirmation of it’s validity.  I should be clear that I have only heard an audio program on the topic at this point.  The interview was conducted by someone I trust, and the interviewees from the company were impressive.  I’ve included some more links below, including the audio file.  However, again, if you sign up, please do so from the rfrazier link above.  Let me know what you think.

Sincerely,

Ron Frazier
Moderator - futureenergynow, futureenergyproducts

http://peswiki.com/index.php/Directory:H2Oil%27s_Nanotech_Fuel_–_eeFuel_and_eeLube_%284ourfuture - Pure Energy Systems page about this product.
http://pesn.com/Radio/Free_Energy_Now/recordings/2008/080602_RichardHicks_and_DanAtkinson_H2Oil_eeFuel.mp3 - Audio interview.

http://groups.yahoo.com/group/futureenergynow/ — http://groups.yahoo.com/group/futureenergyproducts/

Hello all.  I’ve been working to enhance the RSS Feeds of the blog.  I have now added a link to the end of each post that is accepting comments so you can follow comments to that post by RSS feed.  I plan to be doing this as a regular occurance.  If I forget, you can take the permalink for any article and add “feed/” to the end (without the quotes) and you can get the feed for comments for that article.  I’ve also added a feed icon on the left sidebar which will retrieve only items with the Podcast category marked.  Normally, this will only contain entries with an audio file attached.  I do have a couple of test entries without audio files.  I’m working on adding a page with RSS feeds for all categories.  I had to check every category for this post in order to force those to appear in the sidebar so I can get the permalinks for them.  I hope that doesn’t cause too much confusion.

Sincerely,

Ron

The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/10/03/new-enhancements-to-the-blogs-rss-feeds/

Track comments for this article through the RSS Feed.

   ( image credit )
(Cosmic Energy)

It might not be obvious, but the first picture above is a fuel cell.  I had a hard time thinking of a picture to represent hydrogen power.  I didn’t like the idea of a hydrogen bomb, nor did I like the idea of a big letter “H”.  Other suggestions are welcome.  This is going to be short.  As most people know, water is composed of Hydrogen and Oxygen.  If you can separate the Hydrogen from the Oxygen, you can then use these gasses in various ways to liberate energy.  The most obvious way is to burn the Hydrogen, which just recombines it with Oxygen.  The net result is heat and water.  It makes a great fuel.  Also, as depicted in the picture above, you can combine the Hydrogen and Oxygen with each other in a fuel cell, which releases heat and electricity.  The problem has been that, traditionally, it has been very hard to separate the gasses from the water.  There have been great advances recently in terms of separating water.

Before I go on, I want to give kudos to Sterling Allen who operates Pure Energy Systems ( http://pureenergysystems.com/).  Sterling produces and publishes a phenomenal amount of information about alternate energy, and is certainly a driving force in the industry.  I have his permission to report on content from his sites, and many of the things discussed here will be coming from that source.

Recently, a number of researchers have been reporting good success separating Hydrogen and Oxygen from water using pulsed electrolysis systems as well as cell plates of various configurations, particularly with plates very close together.  There is now evidence to support the idea that you can liberate more energy in the Hydrogen and Oxygen gas than it takes to split them.  This represents a phenomenal potential as an alternate energy source.  Water is one of the most abundant compounds on the planet, so water as fuel is very appealing.  Also, these experiments have the potential to be done by amateur researchers without huge funding.  I plan to be studying this much more as time goes by.  For now, I’m providing a few references for you to look at.  Obviously, there are many more references which could be listed.

• Sterling Allen’s Free Energy Now podcast, August 13, 2007
  Water Disassociation Using Zero Point Energy
  http://www.podshow.com/shows/?mode=current&show_id=1049&set=1&page=1
• Sterling’s PESWIKI page on this topic
  http://tinyurl.com/2k2kax
  ( The blog system didn’t like the long address for some reason.  The tinyurl points to
  http://peswiki.com/index.php/Directory:Water_
  Disassociation_Using_Zero_Point_Energy .)
• Water Fuel Website
  (I haven’t had time to look at this in depth, but it looks interesting.)
  http://waterfuel.100free.com/

Ron

If you wish to subscribe to the blog, please see the RSS links at the bottom or the RSS widgets on the side of the blog page.

Copyright (c) 2007 by Ron Frazier

You may cite or quote me for non-commercial purposes as long you do not change the content and as long as you provide a link back to the source:  http://c3energy.com/blog/wordpress/ .

The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/09/05/hydrogen-power-fuel-from-water/

Track comments for this article through the RSS feed.